Tollens epoxy finish is a two pack solvent based paint suitable for kitchens, workshops, factories, and chemical plant floor.
Colour:Available in pastel and dark shades
Finish :High gloss/Egg Shell
Theoretical Coverage:8 m2/ lit
Curing time:15 –20 hours at 25C
Full cure:7 days
Flash point:22°C (ISO 367 –83)
Specific gravity:1.35 when mixed A+B
Pot life: 8 hours at 25C
Mixing ratio:4 parts base"A" : 1 part hardner "B"
High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
This product has excellent adhesion to most substrates, easy to clean, and when cured have excellent resistance to water, mineral oils ,chemicals ( various acid and alkali solution in mild form)
Tollens Epoxy Finish can be brushed, rolled or sprayed. .Use where application temperature can be proceed above 4C Wash surface thoroughly with fresh water, After drying apply one coat of epoxy sealer primer. Allow to cure 16-20 hours and than apply 2 coats of Tollens Epoxy Floor Coating.
Surface to be coated must be clean, structurally sound and free of all foreign contaminants.
Use with adequate ventilation May cause eye, nose, and throat and skin irritation. Keep out of the reach of children Do not use in tank or pit without proper protection
Metal drums US gallon, and 5 US gallons.