• Contact@matawala.com
  • +91 90049 82441 / +91 8291241386

Products

product

POLYURETHANE COATING

Polyurethane Coating is two component chemically cured product that forms a film that is resistant to chemicals, solvents and abrasion.

properties
  • Colour:Full spectrum

  • Solids:50 +/- 2 %

DRYING TIME – AT 25 ° C
  • To handle:3 hours

  • To Recoat:5 hours

  • Flash point:27 ° C

  • Specific gravity: 1.10 ±0.05

  • Pot life:6 hours

  • Mixing ratio:4 parts base "A" :1 part hardner "B"

  • Solvent:Polyurethane thinner.

  • High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.

Description

This product has excellent adhesion to most substrates and is recommended for heavy duty industrial applications where a tough chemical resistant coating is required.

APPLICATION & REDUCTION:

Polyurethane Coating can be brushed, rolled or sprayed. The preferred method is spraying.

SURFACE PREPARATION:

Surface to be coated must be clean, structurally sound and free of all foreign contaminants. Greasy or oily surfaces should be solvent cleaned. Old paint in peeling condition must be removed. Sandblasting or wire brushing is the preferred methods.

PRECAUTIONS:

Use with adequate ventilation May cause eye, nose, and throat and skin irritation. Keep out of the reach of children Do not use in tank or pit without proper protection

PACKING:

Metal drums one US gallon, 5 US gallons.